PETNOLOGY 2001 seminar
held at Chennai
on 10th November 2001.

Speakers on the dias
Mr.D.Roychowdhury-GM-Technical, DGP Windsor, Mr.PS Kumar-Section Head L&T Ltd.,Mr.SK Sharma -Dy.Director CIPET, Mr.PC Bolur-Consultant, Mr.G.Mariappan-MD- ShriPET,

Chief Guest speaking
Mr.SK Sharma speaking on the occasion.

Audience
Audience

Mr.Satheesh Kumar
Mr.Satheesh Kumar-Editor of "Asian Packaging"- introducing the guests.

Mr.PC Bolur presiding over the first session.
Mr.PC Bolur presiding over the first session.

PC Bolur and Mr.Mariappan


Mr.Mariappan speaking
Excellent presentation of statistics of PET business by Mr.Marriappan.

Mr.Kumar speaking
Good presentation on machinery by Mr.PS Kumar.

A very useful information on processing of PET presented by Mr. D.Roychowdhury.
A very useful information on processing of PET presented by Mr. D.Roychowdhury.

Momento presented to Mr.PC Bolur
Momento presented to Mr.PC Bolur

Momento presented to Mr. G. Mariappan.
Momento presented to Mr. G. Mariappan.

Momento presented to Mr. PS Kumar.
Momento presented to Mr. PS Kumar.

Momento presented to Mr. D. Roychowdhury.
Momento presented to Mr. D. Roychowdhury.

Second session
Second session presided by Dr. Susi Varughese .Professor at IIT-Madras- second from left. Dr T. Swaminathan- Professor At IIT-Madras, Mr.J Paneerselvam-Executive Director Indian Organic chemicals Ltd., and Dr MPK Unni-GM-R and D- Futura Polymers are other speakers.

Brilliant presentation on PET by Dr. MPK Unni.
Brilliant presentation on PET by Dr. MPK Unni.

Thought provoking presentation by Dr. T. Swaminathan.
Thought provoking presentation by Dr. T. Swaminathan.

Momento presented to Dr. Unni.
Momento presented to Dr. Unni.

Momento presented to Mr.Paneerselvam.
Momento presented to Mr.Paneerselvam.

Momento presented to Dr. Swaminathan.
Momento presented to Dr. Swaminathan.


HOME-book

Foreword Preface Contents Introduction Summary
Author: Prabodh C. Bolur .. PLASTINDIA-2000 Photos MoldFlow Users Meet Seminar on FRP IPI's Lecture Meeting at Mumbai
PETNOLOGY seminar

IPI-AITEC Seminar Training At Nilkamal Plastics Windsor Functions-old Answers to YOUR questions ...

HOME Contact-to buy this book Things to know- Process Things to know- Polymers Things to know- Part Design Things to know- Mould
Things to know- Machine Injection Moulding Process Screw Plasticating Moulding Key factors influencing proces Shear strain curve
pvt diagram

Thermal stability Balancing melt Flow Balancing Heat Freezing Quality Problems
Three Balances

Moulded-in Stress Shrinkage Inconsistent Dimension Sink-mark Weld-lines
Moulding Problems

CYCLE TIME Plastics Part Design Flow Analysis .. ..
Engineering Basics in Machine Glossary of technical terms- Physics Glossary of technical terms- Polymer process Myth Understanding Mould Cooling Channels Ideal Moulding Shop