Photos from
PLASTINDIA 2000

PlastIndia 2000 was held at Pragati Maidan - New Delhi, between 19th February to 24th February 2000.

with Mr. MM Patel
The Author Prabodh C. Bolur(at right) with Mr. Mahendra N.Patel(at left).

With Mr. James ONeal
The author (at right) with Mr. David Hahn- Chairman (at 2nd from left), Mr. James O'Neal- Director(left) and Mr.N.K.Balgi- President(2nd from right)of Cincinnati Milacron.

with Mr. G. Posingis
The author (at right) with Mr. G. Posingis (at left) Advisor Production and; PPC- Indo- German Tool Rooms and Mr Ramdas, Manager- allied Publishers Ltd., (center) .

with Deputy Directors of CIPET
The author with Deputy Directors Mr KAR Subramaniam (at left), Mr.SK Sharma(2nd from left)and senior management staff of CIPET.

with Mr. Sukumar of CIPET
The author (at right) with Mr. Sukumar(at center)Manager CIPET and; Mr. Ramdas (at left) Manager, Allied Publishers Ltd.

with Mr. Rajeshwar
The author (at right) with Mr. Rajeshwar (at left) of Fanuc India Ltd.,

with Mr. VS Gawand
The author (3rd from left) with Mr. VS Gawand (at right) and Vinit Gawand (2nd from left)both of Tejas PlasMachinery and MS Kulkarni(at left).

with Mr. H.Satwara
The author (at center)with Mr. H.Satwara (at left) of WINSTAR Hydraulics and; Mr. DM Gorawala in front of WINSTAR two colour Injection Moulding machine.

With Mr. P.Marimuthu
The author (at left) With Mr. P.Marimuthu (at center) CEO Arun Engineering and Mr. Mohan -Manager Arun Engineering. Arun Engineering is a leading manufacturer of ancilliary equipment for plastics processing in Chennai.

With Mr. GD Kamat
The author With Mr. GD Kamat (at right) of SCI-Tech, a leading book seller in India.


Millineum's MoldFlow User Meet
at Mumbai
on 5th and 6th October 2000


Photographs
inaguration

From left to right Mr. S Venkatramani- Head Product-SBU of TCS, Mr. PC Bolur- Chief Guest, Mr. Pradeep Kamat- Chief Technical support, Mr. Ho CEO Moldflow South Korea, Mr.NK Desai of GodrejGE,Mr Balaji Country ManagerTCS

Mr.PC Bolur while declaring the MoldFlow Users Meet open spoke about the importance of taking first step correctly in Injection Moulding of Plastics i.e verification of part design to ensure high degree of Mouldability with the help of MoldFlow. The errors (bugs) of the first step may not be possible to correct at later steps.

MoldFlow expert-users in the audiance

Mr. Pradeep Kamat initating the debate. Mr Sanjeev Kulkarni of (VIP Ind. Ltd) seated in the first row is a very highly respected expert of MoldFlow in India.

Active partcipation of India's MoldFlow Experts. MoldFlow users population is increasing now in India.


Photos from
SEMINAR ON FRP AND APPLICATIONS

held at IIT Chennai's IC and SR Seminar hall on 17th March 2001.


SK Sharma
Mr. SK Sharma- Deputy Director of CIPET- presenting a paper SHORT FIBRE COMPOSITES and THEIR PERFORMANCE


Participants from leading companies
Participants from leading companies.


Mr. AK Gaur presenting his paper AN INSIGHT into injection moulding of FRTP
Mr. AK Gaur-Vice President, SRF Ltd.- presenting his paper- AN INSIGHT into injection moulding of FRTP"


Dr.Sanjeev Dwivedi
Mr.Sanjeev Dwivedi - Manager-Key account marketing- GE Plastics India, presenting his paper on Glass reinforced thermoplastics for engineering application and their performance


Dr.MD Chakraborty
Dr.MD Chakraborty speaking on PEEK and PES


Prabodh C Bolur presenting a paper on PITFALLS in Injection Moulding
Prabodh C Bolur presenting a paper on PITFALLS in INJECTION MOULDING


Dr.NG Nair presenting his paper MOULDING of Short Fibre Reinforced Thermoplastics
Dr.NG Nair- Professor and head of Composites Technology Centere-IIT-Chennai, presenting his paper MOULDING of Short Fibre Reinforced Thermoplastics"


Participants from leading companies.
Participants from leading companies.

Mr.YJ Jayakumar - Executive secretary FRP Institute
Mr.YJ Jayakumar - Executive Secretary FRP Institute, briefing about Institutes activities.


Question-Answer session
Question-Answer session


AK Gaur
Mr.AK Gaur answering questions


Indian Plastics Institute's
Lecture Meeting on
"PITFALLS IN INJECTION MOULDING"
at Mumbai on 28th June 2001.


Photographs
Welcome with flowers

Welcome with Flowers

On the dias

From right to left Mr. Prabodh C. Bolur, Dr. Vasudev.....

Introduction

Introduction and welcome speech

Prabodh C Bolurs lecture

Prabodh Bolur speaking on "Pitfalls in Injection Moulding".

Audiance

Tremendous interest on the subject of "Pitfalls in Injection Moulding"

Mr.Ashok Karnik

Mr. Ashok Karnik discussing about the organised tour of K2001.

Momento presented to Mr. PC Bolur

Dr Vasudev presenting a momento to Mr. Prabodh Bolur.




PETNOLOGY 2001 seminar
held at Chennai
on 10th November 2001.

Speakers on the dias
Mr.D.Roychowdhury-GM-Technical, DGP Windsor, Mr.PS Kumar-Section Head L&T Ltd.,Mr.SK Sharma -Dy.Director CIPET, Mr.PC Bolur-Consultant, Mr.G.Mariappan-MD- ShriPET,

Chief Guest speaking
Mr.SK Sharma speaking on the occasion.

Audience
Audience

Mr.Satheesh Kumar
Mr.Satheesh Kumar-Editor of "Asian Packaging"- introducing the guests.

Mr.PC Bolur presiding over the first session.
Mr.PC Bolur presiding over the first session.

PC Bolur and Mr.Mariappan


Mr.Mariappan speaking
Excellent presentation of statistics of PET business by Mr.Marriappan.

Mr.Kumar speaking
Good presentation on machinery by Mr.PS Kumar.

A very useful information on processing of PET presented by Mr. D.Roychowdhury.
A very useful information on processing of PET presented by Mr. D.Roychowdhury.

Momento presented to Mr.PC Bolur
Momento presented to Mr.PC Bolur

Momento presented to Mr. G. Mariappan.
Momento presented to Mr. G. Mariappan.

Momento presented to Mr. PS Kumar.
Momento presented to Mr. PS Kumar.

Momento presented to Mr. D. Roychowdhury.
Momento presented to Mr. D. Roychowdhury.

Second session
Second session presided by Dr. Susi Varughese .Professor at IIT-Madras- second from left. Dr T. Swaminathan- Professor At IIT-Madras, Mr.J Paneerselvam-Executive Director Indian Organic chemicals Ltd., and Dr MPK Unni-GM-R and D- Futura Polymers are other speakers.

Brilliant presentation on PET by Dr. MPK Unni.
Brilliant presentation on PET by Dr. MPK Unni.

Thought provoking presentation by Dr. T. Swaminathan.
Thought provoking presentation by Dr. T. Swaminathan.

Momento presented to Dr. Unni.
Momento presented to Dr. Unni.

Momento presented to Mr.Paneerselvam.
Momento presented to Mr.Paneerselvam.

Momento presented to Dr. Swaminathan.
Momento presented to Dr. Swaminathan.



Indian Plastics Institute
Coimbatore Sub Chapter
in collaboration with

DEPARTMENT OF POLYMER ENGINEERING

One-Day SEMINAR ON

"PROCESSING OF POLYMERS FOR PROFITS"

at Amriteshwari Hall, AITEC, Coimbatore on 25th January 2003.


Dr.N.N.Pilai, Director,AITEC with Polymer Engineering students at the Seminar.

Polymer Engineering students at the Seminar.

Prayers to begin with.

Director Dr.N.N. Pillai with speakers - Dr.MPK Unni, General Manager( Fibre Mfg and R and D) and Mr.P.C.Bolur, consultant

Dr.N.N.Pillai welcomming Mr.V.Chinnaswamy-Chairman of IPI -Coimbator Chapter.

Welcome to Mr.V.Chinnaswamy.

Welcome to Dr.N.N.Pillai.

Welcome to Mr. Prabodh C. Bolur.

Welcome to Dr.MPK Unni.

Prof.R.Subba Rao addressing seminar participants.

Dr. N.N. Pillai addressing seminar participants.

Mr.V.Chinnaswamy addressing seminar participants.

Inagurating the SEMINAR by lighting lamp.

Partcipants in the SEMINAR.

Mr.Prabodh C. Bolur presenting a paper on "Cycle time reduction in Injection moulding.

Mr.M.Kannan presenting a paper on Polymer material selection for Injection Moulding.

Dr.MPK Unni presenting a paper on Chemistry, Physics and Engineering fundamentals for Profits from Injection and Stretch Blow Moulding of PET Containers.

Mrs. Lakshmi Madhu presenting a paper on Polypropylene for enhancement of Profits and Performance.

National Anthem.




Training at Nilkamal