Photos from

PlastIndia 2000 was held at Pragati Maidan - New Delhi, between 19th February to 24th February 2000.

with Mr. MM Patel
The Author Prabodh C. Bolur(at right) with Mr. Mahendra N.Patel(at left).

With Mr. James ONeal
The author (at right) with Mr. David Hahn- Chairman (at 2nd from left), Mr. James O'Neal- Director(left) and Mr.N.K.Balgi- President(2nd from right)of Cincinnati Milacron.

with Mr. G. Posingis
The author (at right) with Mr. G. Posingis (at left) Advisor Production and; PPC- Indo- German Tool Rooms and Mr Ramdas, Manager- allied Publishers Ltd., (center) .

with Deputy Directors of CIPET
The author with Deputy Directors Mr KAR Subramaniam (at left), Mr.SK Sharma(2nd from left)and senior management staff of CIPET.

with Mr. Sukumar of CIPET
The author (at right) with Mr. Sukumar(at center)Manager CIPET and; Mr. Ramdas (at left) Manager, Allied Publishers Ltd.

with Mr. Rajeshwar
The author (at right) with Mr. Rajeshwar (at left) of Fanuc India Ltd.,

with Mr. VS Gawand
The author (3rd from left) with Mr. VS Gawand (at right) and Vinit Gawand (2nd from left)both of Tejas PlasMachinery and MS Kulkarni(at left).

with Mr. H.Satwara
The author (at center)with Mr. H.Satwara (at left) of WINSTAR Hydraulics and; Mr. DM Gorawala in front of WINSTAR two colour Injection Moulding machine.

With Mr. P.Marimuthu
The author (at left) With Mr. P.Marimuthu (at center) CEO Arun Engineering and Mr. Mohan -Manager Arun Engineering. Arun Engineering is a leading manufacturer of ancilliary equipment for plastics processing in Chennai.

With Mr. GD Kamat
The author With Mr. GD Kamat (at right) of SCI-Tech, a leading book seller in India.


Foreword Preface Contents Introduction Summary
Author: Prabodh C. Bolur .. PLASTINDIA-2000 Photos MoldFlow Users Meet Seminar on FRP IPI's Lecture Meeting at Mumbai

IPI-AITEC Seminar Training At Nilkamal Plastics Windsor Functions-old Answers to YOUR questions ...

HOME Contact-to buy this book Things to know- Process Things to know- Polymers Things to know- Part Design Things to know- Mould
Things to know- Machine Injection Moulding Process Screw Plasticating Moulding Key factors influencing proces Shear strain curve
pvt diagram

Thermal stability Balancing melt Flow Balancing Heat Freezing Quality Problems
Three Balances

Moulded-in Stress Shrinkage Inconsistent Dimension Sink-mark Weld-lines
Moulding Problems

CYCLE TIME Plastics Part Design Flow Analysis .. ..
Engineering Basics in Machine Glossary of technical terms- Physics Glossary of technical terms- Polymer process Myth Understanding Mould Cooling Channels Ideal Moulding Shop